4-Max Inspiration F3A 50E Manuel d'instructions de montage - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} 4-Max Inspiration F3A 50E. 4-Max Inspiration F3A 50E 9 pages.
Imprimer la page
Step 7
Secure two servos on the servo plate in the
fuselage using the servo screws supplied
with the servos as per the photo. The holes
are cut for the Emax ES3001 servo. To get
at the rear screws, cut the piece of foam out
at the bottom of the slot for the canopy.
Step 8
Connect the servos to the push rods using
the swing keepers.
Step 9
Secure the white control horn and backing
plate on the elevator with two M2.5 by
16mm long self-tapping screws.
Connect control wire to the servo control
horn on the elevator. Clip the Swing Keeper
in place to stop the wire coming out of the
control horn as per the photo.
Step 10
Repeat for the rudder.
Step 11
Attach the motor to the "X" mount
(supplied)
Step 12
Install the motor assembly on the motor box
using the 10mm spacers (supplied).
Step 13
Install the Prop driver on the motor using
the 4 screws supplied with the motor.
www.4-Max.co.uk
Tel: 01256 782 512