DuraVent polypro Manuel d'instructions d'installation - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} DuraVent polypro. DuraVent polypro 16 pages. Single-wall gas vent system for category ii & iv gas-burning appliances

Imprimer la page

Figure 21

The lower portion of the vent system must

be supported and firestopped per appliable

DuraVent instruction.

MAINTENANCE

Have your venting system checked annually.

This can be done easily by the same

technician who inspects & services the

appliance. Recommended areas to inspect

are as follows:

- Check areas of the Venting System which

are exposed to the elements for wear or

damage. If damage is found, the components

should be replaced immediately.

- Where possible, look into the Termination

Cap to verify no foreign material is there to

block the vent. Remove any foreign material

found.

- Where practical, inspect joints to verify

that no Pipe Sections or Fittings have been

disturbed, and consequently loosened. Also

check mechanical supports such as Wall

Straps, support plates, etc for rigidity.

HANGER

MOUNTED

TO TOP OF

SUPPORT,

BELOW

GASKET

PLATE

SEAL AS

REQ'D