DURAVIT Happy D.2 H2 7696 Manuel - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} DURAVIT Happy D.2 H2 7696. DURAVIT Happy D.2 H2 7696 10 pages.
Imprimer la page
BUILDINg UP A CONNECTION TO
ThE SOUNDSYSTEM
1
As soon as the mirrorcabinet gets
connected to electricity, the sound-
system will be activated.
8:51 AM
Bluetooth
General
Bluetooth
ON
Deviees
Duravit Soundsystem
5
The Soundsystem will be shown as
„Duravit Soundsystem" in the Blue-
tooth® menue on your device. Now
connect your device with the sound-
system. If you`re asked to type in a
PIN code, please enter 1817.
6
BAL_56878/08.13.1
Bluetooth
ON
2
Activate the Bluetooth®-function on
your device.
6
Start the music on your device.
To cut the connection:
– Turn off „Bluetooth®" on your
device.
– Cut the connection to the atteched
device „Duravit Soundsystem".
– If you`re out of range for longer
than 3 minutes the connection will
be cut automaticly.
3
3 sec
Activate the capacitive switch on the
inner right side of the mirror cabi-
net by touching the marked area for
at least 3 seconds, but maximum 5
seconds.
4
A recognition sound can be heard.
The Pairing-Mode stays active for
ca. 1 minute. In this time you should
build up a connection to the sound-
system. If it takes you longer than
one minute you`ll have to press the
pairing button again.