4-noks Power Reducer Manuel technique - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel technique pour {nom_de_la_catégorie} 4-noks Power Reducer. 4-noks Power Reducer 20 pages.

4-noks Power Reducer Manuel technique
13

Troubleshooting

PROBLEM DESCRIPTION
The protection of Power Reducer (16 A cir-
cuit breaker or installed between Power Re-
ducer and the power supply) has failed
The protection of immersion (fuse installed
between Power Reducer and immersion)
has burned out.
14
CE Norms
According to the European norms 2004/108/CE - Electro Magnetic Compliance e 2006/95/CE - Low Voltage Directive, 4-noks s.r.l. declares that the
device named Power Reducer is in compliance with the following norms:
EN 55014-1: Electromagnetic compatibility - Requirements for households appliances, eclectric tools and similar apparatus - Part 1: Emissions
EN 55014-2: Electromagnetic compatibility - Requirements for households appliances, eclectric tools and similar apparatus - Part 2: Immunity
- Product family standard
EN 61000-3-2: Electromagnetic compatibility - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase
EN 61000-3-3:2008 Electromagnetic compatibility - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public
low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection.
EN 60335-1: Household and similar electrical appliances - Safety - Part 1: General requirements
WARNING! This appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities or by people who do not have
the proper experience or qualification, unless under control or properly taught by a person who is responsible for their own safety.
WARNING! Power Reducer is not a toy. Children must be supervised to make sure they do not play with this device.
15
Disposal
Packaging
The packaging delivered alongside the Power Reducer can be reused as long as it is kept in good conditions. As waste, the packaging is to be treated
as "urban waste". Do not abandon the packaging but dispose it properly according to the national law.
INFORMATION
according to the Waste Electrical and Electronic Equipment Directive (WEEE Directive - European Community directive 2002/96/EC)
• The symbol adopted by the European Council, reported on the appliance, indicates that the item has been release on the market and
that it (Power Reducer and all its components) should not be dumped with normal household waste, but sorted and disposed of in appro-
priate authorised disposal facilities, such as those found at municipal waste sites.
• Get in touch with manufacturer / seller / supplier or other organizations registered with the National Register to know more about Local Authorised
Disposal Facilities. Waste originated from domestic use (or similar origin) can de disposed in regular domestic separate waste collection areas.
• Users of electrical and electronic equipment from private households have the possibility of returning WEEE free of charge to the supplier / retailer
when buying new devices with similar features than the older ones. Suppliers and retailers will then get in touch with the subject in charge for the
appliance withdrawal / disposal.
• A proper waste disposal allows the reuse, recycling and other forms of recovery of such wastes so as to reduce the disposal of waste (lower volume
of waste sent to incinerators or land-fills brings to natural resources will thus be conserved). It also allows to reduce the potential negative effect on
the environment and on the human health caused by the improper waste treatment.
• Unauthorised and illegal disposal carried by user brings to national penalities according to Directives 91/1567/CE and 91/689/CE.
4-noks srl
Via per Sacile, 158
31018 Francenigo di Gaiarine (TV) ITALY
Tel +39 0434 768462
Fax +39 0438 694617
www.4-noks.com
SOLUTION
Do NOT reactivate the protection.
Technical assistance is required. Proper technical assistance can be provided only by qualified
personnel trained to manage possible short circuits on the device power supply elements
Technical assistance is required. Proper technical assistance can be provided only by qualified
personnel trained to change the blown fuse with another one with the same features:
16 A
Cat FF
Any other kind of fuse will cause a damage beyond repair to the Power Reducer power control
Pag
18