Contemporary Research ICC1-232 Manuel du produit - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel du produit pour {nom_de_la_catégorie} Contemporary Research ICC1-232. Contemporary Research ICC1-232 13 pages. Rs-232 display controller, 1-way control
Également pour Contemporary Research ICC1-232 : Spécifications (2 pages), Manuel du produit (16 pages)
Imprimer la page
Setting Device Number and Parameters
In the next step, you'll need to set up the device number and operation parameters for the ICC1-232. Turn the enclosure so
that the DIP switches are on the bottom as shown.
1. Make sure S2 Switch 6 is OFF (unit in Device mode).
2. Set the Device number by turning on the switches that add up to the desired device number. For example, for
Device #259, turn on S1 switches 1 and 2 (3), S2 switch 1 (256)
Zone Switch Settings
To define the controller's Zone #, use the following pattern of switches ON for the S2 DIP.
Zone
Value
1
256
2
512
3
768
4
1024
5
1280
6
1536
7
1792
8
2048
9
2304
10
2560
11
2816
12
3072
13
3328
14
3584
15
3840
Installation Process and Documentation
Most dealers will pre-configure the controller's address before hanging displays. After setting the address, use a label that
states the unit's address and location. Some use this method:
Room 305 - 515 - 12/2
The first identifies the location/name of the display. The second shows the specific address. The last set shows the switches
in S1/S2 that are set to ON.
It's a good idea to define this first in a spreadsheet, with the columns defining the name, address, S1 and S2 ON settings.
Then, one person can set up all the controllers and label them.
Once the controller is configured and labeled, it's easier for less-trained installers to Velcro the controller on the back of the
display, provide power, and hang the displays. It's much easier to pre-configure ahead of time than perform the task once
the displays are installed.
Contemporary Research
1
2
3
256
512
1024
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
6
4
2048
X
X
X
X
X
X
X
X
ICC1-232 Manual