Contemporary Research QIP-YPB2 Manuel du produit - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel du produit pour {nom_de_la_catégorie} Contemporary Research QIP-YPB2. Contemporary Research QIP-YPB2 14 pages. Qip iptv encoders

Imprimer la page

Advanced

This series of menus sets global values for QIP operation.

A-Pgm Number

Sets a specific Program number 1-65535, default is 1 for A, 2 for B.

A-Source ID

Sets Source ID 1-65535

A-Bitrate Mode

Only visible when QIP outputs on Ethernet only. Selects Constant or Variable rate

A-QMODIPPort*

Sets Source IP port for streaming (2728 default)

A-Mcast TTL

This Time To Live function assures that multicast streams don't loop forever when they're not

being used. 0-255 - Typical settings:

0- restricted to the same host, will not be forwarded by any interface

1-restricted to the same subnet, won't be forwarded by router

32-(default) restricted to the same site

64- restricted to the same region

128- restricted to the same continent

A-AVDropped

Counts the number of frames dropped for testing, press right arrow to clear

A-MPEG2DcDly

Sets encoding MEPG2 delay from 200 to 500 ms. Note that internal buffer operation adds 150

ms.

A-MPEG4DcdDly

Sets encoding MPEG4 delay from 300-500 ms. See above.

B-Pgm Number

Sets a specific Program number 1-65535, default is 1 for A, 2 for B.

B-Source ID

Sets Source ID 1-65535

B-Bitrate Mode

Selects Constant or Variable rate

B-QMODIPPort*

Sets Source IP port for streaming (2729 default)

B-Mcast TTL

This Time To Live function assures that multicast streams don't loop forever when they're not

being used. 0-255

B-AVDropped

Counts the number of frames dropped for testing, press right arrow to clear

B-MPEG2DcDly

Sets encoding MEPG2 delay from 200 to 500 ms. Note that internal buffer operation adds 150

ms.

B-MPEG4DcdDly

Sets encoding MPEG4 delay from 300-500 ms. See above.

Fan Speed

Fan speed in percent, operation is automatic

Temperature

Processor temperature, tends to hover around 139 degrees

EAS Video

Selects video input to use when an Emergency Alert has been triggered, may be any input

Selects audio input to use when an Emergency Alert has been triggered, may be any input

EAS Audio

IP TS Mode

Sets SPTS or MPTS for IPTV streaming. When set to MPTS, the A and B IP Ports will have the

same address, using the last defined address.

CVCT

Activates inclusion of virtual channel ID and short Name in the video stream.

On (default) | Off

Telnet Port

23 (default)

IP port for Telnet communication – Click or hold Up or Down to set.

Setup Lockout

On or Off On locks out Setup button

Pressing Setup and the Right key will unlock Setup until the QIP is reset.

Save Data

Custom Reset – saves current settings to use for Reset

Reset

Select Factory Default or Custom settings

IP Speed

Auto | 100 Mbps

Reboot

Left or Right arrow cycles between Reboot, AV Dropped, FIFO Full counts, reset from Web page

Contemporary Research

QIP IPTV Encoders