Apli Zapli SCADA Installation - Page 2

Parcourez en ligne ou téléchargez le pdf Installation pour {nom_de_la_catégorie} Apli Zapli SCADA. Apli Zapli SCADA 3 pages.

Imprimer la page
1.
RS 232 DB9
2.
USB Host
3.
HDMI Do not connect
4.
Micro SD slot
5.
M-Bus
M-Bus connector
1.
M-Bus
2.
M-Bus
With protection against overvoltage and short circuit
In the event of prolonged short-circuit situation, converter will reduce output voltage. To restore
converters function it is required to break converters power supply.
Linux COM port names
RS485 - /dev/ttyO5
M-Bus - /dev/ttyO4
RS232 DB9 - /dev/ttyO1
RS232 MMI - /dev/ttyO2
First run
From factory settings, converters IP address is set to 192.168.0.202. You will be able to connect
to converter by setting your IP address in range 192.168.0.XXX with net mask set to
255.255.255.0
Converter requires about 1 minute to start all services with web interface. Web inteface should be
accessible on web address
Login page will be displayed after successfull connection.
Default credentials are:
Username: root
Password: 123
By pressing Login button you will log in.
It is recommended to immediately change default password, especially when device is visible on
public network
Credentials to web interface are identical with credentials used for ssh.
Changing password
You can change your pasword by clicking on your username located in menu below logo. Small
context menu should pop up with option to
©2022 Apli s.r.o.
Zapli SCADA
http://192.168.0.202
Change password.
2/3
Installation