Addonics Technologies CipherUSB CA256USB Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Addonics Technologies CipherUSB CA256USB. Addonics Technologies CipherUSB CA256USB 6 pages. Cipherusb

Imprimer la page

1. Read the firmware update for important changes to the unit's

operation or the update procedure. If a firmware release note

contradicts these instructions, follow the release notes

instead.

2. Insert the CipherUSB with a storage device. The CipherUSB

will not respond unless a storage device is attached to it.

3. Run the CipherUSB.exe program. If the CipherUSB unit has

not been initialized with a password, the Update Firmware tab

will not appear. Initialize the unit with a password, unplug it,

plug it back in, then select the Update Firmware tab.

4. Be sure the DX Information section shows AES Length is

256 and ECB mode is selected.

5. In the Update new firmware section, click the Firmware

button. Change the file type to "BinaryFile(*.256) if neces

sary, then browse to the folder containing the new firmware

and open it.

6. Click the Start Programming button. A dialog will shortly

appear instructing you to remove the CipherUSB and

reinsert it. After removing and reinserting the device, the

firm ware update will be completed.

Note: The CipherUSB may or may not need to be initialized with

the password again. If a storage device using the existing pass-

word is connected when the CipherUSB is reinserted and the

file system appears intact, the password has been retained.

Otherwise it may be necessary to set the password again.

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST)

Phone: 408-453-6212

Email: www.addonics.com/support/query/