Aplisens SP-11 Manuel de l'utilisateur - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Aplisens SP-11. Aplisens SP-11 16 pages.

10. INSPECTION

10.1.

Periodical inspection must be conducted according to user standards in force.

While inspecting, check the condition of electrical connections on clamps (firmness of

connections) and the stability of fixing.

10.2.

If the device is exposed to mechanical damage, electrical overvoltage or it works improperly –

conduct inspection as necessary.

If there is no signal on the transmission line or signal value is incorrect, check the condition of

the cable, the condition of connections on clamps, etc. Check if the power voltage value and

load resistance is correct.

If the line is functional, check the operation of the device.

Waste or damaged transmitters should be dismantled and disposed of in accordance

with Directive (2012/19/EC) on waste electrical and electronic equipment (WEEE) or

returned to the manufacturer.

The producer retains the right to implement structural and technological alterations that do not

lower the device parameters.

03.B.005

IO.ZSP-41.SP-11.SP-02