Aplisens ZSP-41/2 Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Aplisens ZSP-41/2. Aplisens ZSP-41/2 16 pages.

INTRODUCTION

The subject of this user's manual are rail-mounted signal converters (isolators) type ZSP-41,

ZSP-41/2, SP-11 and SP-02.

The manual includes data, hints, and recommended action for installation and use of the

converters, as well as troubleshooting tips.



Read this instruction carefully prior to, installation, startup, or any other work.



Installation and maintenance can only by conducted by qualified personnel,

authorized to install electrical equipments and measuring devices.



Use the device according to its intended use, without exceeding maximum

acceptable parameters.



Prior to assembly or disassembly of the device, be sure to disconnect the power

source.



It is not acceptable to conduct any repair or otherwise tamper with the electronic

circuit of the device. Damage assessment and possible repair can only be made by

the producer or an authorized unit.



Do not use the device when it is damaged. If malfunction occurs, disconnect the

device.

Along with the device, the user receives the following:

a) Product certificate, functioning as a warranty card;

b) Declaration of conformity (on customer's request);

c) User's manual designated „IO.ZSP-41.SP-11.SP-02(ENG)"

Positions b), c) are available from the website

www.aplisens.pl

03.B.005