APLOS R0-5050 Manuel d'instruction - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} APLOS R0-5050. APLOS R0-5050 20 pages. 5 stage reverse osmosis drinking water system, 50gpd

Imprimer la page

6. Installation Steps

Leave the feed valve 5 and purified water faucet 3 open for 30 minutes.

Then open the tank valve 6. Close the faucet 3 and carefully check all

connections for leaks.

CAUTION! The first week after installation, check the system daily for

leaks, do it periodically in the future. If you are leaving for a long time

such as for a business trip or vacation, shut off the water supply.

Let the water tank get filled (you will hear the water stop flowing). De-

pending on the water pressure in your water mains may take 1.5 to 3 hours.

After that drain all water from the tank by opening the faucet 3 until the

flow goes to a drip or slow dribble. After the tank has been emptied, close

the faucet 3 so that the tank starts re-filling. Depending on the pressure

in your water mains, it may take 1.5 to 3 hours. After the tank is filled for

the second time, you can use purified water. In the models of filters with a

mineralizing post-filter the purified water can be slightly turbid after instal-

lation. Drain several additional tanks of purified water.

Initially your water may appear cloudy which is due to air in the system.

If you leave the glass of water for a few minutes, the water will become

clear as the air escapes. This is normal and will eventually clear as the air is

eventually flushed out of the filters.

A(1.1)