Apogee Symphony Mk II Manuel de démarrage rapide - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Apogee Symphony Mk II. Apogee Symphony Mk II 17 pages.

Pro Tools

Setup

Connecting to Avid HDX, HD Native Thunderbolt and HD Core/Accel Hardware

The following instructions refer to Symphony I/O Mk II Pro Tools HD models. No software installation is required or provided

with Symphony I/O Mk II HD. All Symphony I/O Mk II hardware settings can be made from the front panel touchscreen.

To connect a single Symphony I/O Mk II to your Pro

Tools HDX or HD Native hardware, simply connect

Symphony I/O Mk II's Option card mini DigiLink port

directly to any available port.

Instructions to add additional Avid or Apogee

interfaces can be found in the User's Guide.

Note you can not connect Symphony I/O Mk II to an

Avid interface. Avid interfaces and Symphony I/O Mk

II interfaces must be connected to separate ports.

| Symphony I/O Quick Start Guide

Once hardware connections have been made, launch

Pro Tools software.

If a single I/O Module is installed, then Symphony I/O Mk II

appears in Pro Tools Hardware Setup as a single HD I/O.

If two I/O Modules are installed, then Symphony I/O Mk II

appears in Pro Tools Hardware Setup as two HD I/Os.

Symphony I/O Mk II to Pro Tools HDX

PORT 1

Symphony I/O Mk II to Pro Tools HD Native PCI

Symphony I/O Mk II to Pro Tools HD Native

Symphony I/O Mk II to Pro Tools Accel Core (requires mini DigiLInk adapter, not included)

PORT 2

HDX

PORT 1

PORT 2

Accel Core

Symphony I/O Quick Start Guide |