Apogee Duetta Manuel d'instructions
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Apogee Duetta. Apogee Duetta 20 pages. Exchange of the bass slides
Imprimer la pageInstructions for exchange of the bass slides in a APOGEE
CALIPER, DUETTA
Caveat:
The exchange of a bass slide is not for the inexperienced handyman. Some
skills, technical understanding and experience in working with tools is
Prerequisite for the success of the exchange.
We take no responsibility for damaged or crumpled foil and poor
sound results after installation.
With careful work, and sufficient technical expertise is the result of
compared to the original.
What do you need?
Tool:
Hammer
a good bit set with Zollbits
soldering iron
Elektrotacker
Superglue
double-sided
Screwdriver
scrapers
Silicone
Velcro
5 pcs 5mm spacers (wood)
Punch
a 2-meter table
Cutting knife
Measurement: Multimeter
Microphone
Audio
Preparation
Make sure you order the correct film. We supply the left and right
separately.
In addition, the films for the signature/reference models are not the same as the
standard models.
Check the contents of the delivery.
Included:
1
1
1
1 Manual-CD
tape
strips
8
mm
software
Bass
Panel
set
of
tube
Aluminiumlot
for
frequency
damping
strips
measurement