Apogee Symphony I/O Mk II SoundGrid Manuel de l'utilisateur - Page 20
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Apogee Symphony I/O Mk II SoundGrid. Apogee Symphony I/O Mk II SoundGrid 20 pages. For units equipped with the wsg option card
Imprimer la page
Reference
Resetting the SoundGrid Network Card
If an unsuccessful firmware update results in the Symphony I/O Mk II SoundGrid no longer being recognized
by MultiRack or SoundGrid Studio (the device is not showing in the inventory panel), you can use the Reset
button to try to recover the unit.
The Reset button is on the SoundGrid Option Card on the Symphony I/O Mk II's rear panel.
● Turn off the unit.
● Press and hold the Reset button.
● Restart the unit while holding the button.
● Release the Reset button once the device has fully booted.
The unit is now in "boot mode", and a new firmware update can be performed.
Additional Support Resources
For additional information and help regarding your Symphony I/O Mk II when connected to a Waves SoundGrid
system, please contact Waves Support at
For repair of your Symphony I/O Mk II SoundGrid unit, contact Apogee at
Manuals for SoundGrid Studio and other SoundGrid devices can be found at
https://www.waves.com/downloads/manuals
The general User's Guide for the Symphony I/O Mk II can be found at
http://www.apogeedigital.com/support/symphony-io-mk-ii#tab-id-2
APOGEE SYMPHONY I/O MK II SOUNDGRID USER'S GUIDE
w ww.waves.com/support
w ww.apogeedigital.com/support
Page 20