Apogee Mini-Me Manuel de configuration

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Apogee Mini-Me. Apogee Mini-Me 1 pages. Connnects
Également pour Apogee Mini-Me : Fiche technique (2 pages)

Imprimer la page

ApogeeConnnects

Apogee

Hardware Connections

Hardware Settings

Set for

Set for desired

desired gain

sample rate

(up to 48kHz)

Software Settings

After making all the hardware connections, open Pro Tools

software. Under Setups select Hardware Setup.

In the Hardware Setup page, set Clock Source to S/PDIF,

and set Ch. 1-2 Input Source to S/PDIF.

As configured above, Pro Tools software inputs are routed

from the Mini-Me's hardware inputs, and Pro Tools software

ouputs are routed to both the MiniDAC's and MBox's

hardware outputs. Also, note that the MiniMe's DIR-USB

and MON knobs are not used.

: MiniMe - MiniDac - Digidesign MBox

Mic Input

(WE-XX-5.0)

S/PDIF

WE-RR-1.0

S/PDIF

WE-RR-1.0

S/PDIF CX

Analog Outs

(WE-XX-5.0)