Apogee V-2 Conversion Kit Instructions

Parcourez en ligne ou téléchargez le pdf Instructions pour {nom_de_la_catégorie} Apogee V-2 Conversion Kit. Apogee V-2 Conversion Kit 5 pages. Converts the spacemonkey models v-2/a4 plastic model kit into a flying model rocket

Imprimer la page

p/n 31114

Kit #12111

Skill Level 4

V-2 Conversion Kit

Converts the Spacemonkey Models

V-2/A4 Plastic Model Kit into a Flying

Model Rocket

Parts List

P/N

Item Name

10091

AT-24/3.75"

10128

AT-33/17.75 (LC)

12358

CBD-33mm ⅛" Plywood (single)

13016

Coupler AC-33 (single)

13031

CR-18/24 (single)

13301

CR-24/33 ⅛" Plywood (single)

13279

CR-33 V-2 (LC)

13056

¼" Launch Lug

24043

Crimped Engine Hook

29520

300# Kevlar X 8 ft

29602

Clay Nose Wt (⅓ stick) {30 grams}

29624

Wood Screw Eyebolt Size 9

29116

24" Plastic chute

31114

Instruction Sheet A

31115

V-2 Launching Instructions

47124

Clear Plastic Bag 6X24X2mil

Supplies Needed

Spacemonkey Models V-2/A4 Plastic Model Kit

Pencil

Hobby Knife

Razor Saw

Wood Dowel or Stick (to spread glue inside tube)

Ruler

Sand Paper (220 and 400 Grit)

Wood Glue

Super Glue (Thick Viscosity)

Rocket engine to push in the engine block

The V-2 Conversion kit is another fine product from:

Colorado Springs, Colorado USA

web site: www.ApogeeRockets.com

Made in USA

Qty

Page 1