Dascom Tally T2540 Manuel de démarrage rapide
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Dascom Tally T2540. Dascom Tally T2540 2 pages.
Imprimer la page
Quick Start Guide
Important safety instructions
For detailed information, refer to the User Guide of the printer. The User Guide is provided as an Adobe Acrobat PDF file
on the CD-ROM shipped with your printer. Be sure to read the safety guidelines in the User Guide before using this prod-
uct. Keep this User Guide in a place which is easily accessible at all times.
Never place the printer in the vicinity of inflammable gas
or explosive substances.
Place the printer on a solid and even base so that it cannot
fall down to the ground.
Do not expose the printer to high temperatures or direct
sunlight.
Keep all liquids away from the printer.
Protect the printer from shock, impact and vibration.
1
Setting up your printer
1.1 Unpacking
Make sure that the "Up" symbols point in the correct direc-
tion. Open the packaging, lift the printer out of the cardboard
box and remove the remaining packaging material.
Check the printer for any visible transport damage and missing
items. The following items should be included:
Printer, Ribbon cassette, Power cord, Quick Start Guide and
CD-ROM.
1.3 Shipping lock
1.4.2
Open the cover of the printer
and remove the shipping
locks.
Turn the tension knob
the direction of the arrow in
order to take up slack of the
ribbon.
A
T2440 T2540 Matrix Printer
Be sure to connect the printer to a socket with the correct
mains voltage.
Always disconnect the system from the mains before
opening the device to perform maintenance work or rem-
edy errors.
Do not perform any operation or action in any way other
than provided in this manual. When in doubt, contact
your dealer or service company.
1.2 Tape
1.4 Install Ribbon
1.4.3
in
A
B
C
When the printer is first taken
Tape
out of the packaging box, the
cover of the printer is taped
as shown in the diagram.
Remove the tape.
1.4.1
Remove the ribbon cassette
from its packaging.
Open the printer cover.
Adjust the printhead to the
center of the print platen.
Insert the recess
bottom of the ribbon cassette
into the holding pin
mounting.
Push the cassette into its
mounting until it clicks into
right and left position.
Close the cover of the printer.
on the
B
of the
C