Abus IPCV10000 Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Abus IPCV10000. Abus IPCV10000 12 pages.
Également pour Abus IPCV10000 : Manuel de l'utilisateur (12 pages)
How to install the ABUS IP Camera Viewer
Connect the ABUS IP Camera Viewer with an HDMI cable to the monitor that
you want to use, to display the camera image.
When operating via network cable, connect the cable now with the ABUS IP
Camera Viewer. If operating via WiFi, proceed directly with the next step.
Connect the ABUS IP Camera Viewer to a USB power supply to turn on the
device and provide power.
Select the appropriate HDMI input tob e displayed on the monitor.
After the ABUS IP Camera Viewer has booted up, you will see the following
startup screen:
Please note that the ABUS Viewer must be connected to a network
that has access to the Internet for initial startup. This also applies to
commissioning after resetting the configuration settings to factory
default.
Example: Start display of the ABUS IP Camera Viewer on the monitor
Explanation of the IP addresses:
http://192.168.0.100
http://192.168.4.1
ABUS Viewer Address from the local connected network
via network cable.
ABUS Viewer address of its own WiFi hotspot
"ABUSVIEWER" (only for configuration access)
7