DaSeDa Electronics HM-75A Manuel - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} DaSeDa Electronics HM-75A. DaSeDa Electronics HM-75A 15 pages. Digital feeder controller

Imprimer la page

7. Vibration sensor

- In order to maintain constant vibration amplitude during operation, attach a vibration sensor to the feeder

Set the constant amplitude control ON in the parameter setting.

8. DATA communication

- Transmit controller status and control data by external data communication with external control device (PLC, computer ..).

- Communication method is 485 method. Up to 32 cables can be connected to one communication cable. (Refer to communication manual)

- Connect to SERIAL on one line.

- Each HM-75A controller has two communication connectors, which are internally connected to each other in parallel,

For convenient connection.

- The communication cable uses shielding wire with three wires.

7-1. How to connect vibration sensor

Vibration sensor should be connected to its own product. (Third-party products are not allowed.)