Abus IPCV10020 Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Abus IPCV10020. Abus IPCV10020 12 pages.

Configuration of the ABUS IP Camera Viewer the network

The ABUS Viewer has a web interface, which is used to configure the device. In

order to access the web interface, you must connect to the ABUS Viewer with your

PC or web-enabled terminal as follows.

Please note that the ABUS Viewer must be connected to a network that has access

to the Internet for initial startup.

An appropriate privacy policy is available at the beginning on the web interface of the

ABUS Viewer.

• Connection via ABUS IP Installer

If you are already using the ABUS IP Installer and have connected the ABUS

Viewer to the network, you can find the ABUS Viewer in the device list and access

the web interface of the ABUS Viewer.

• Connection via network.

If you have connected the ABUS Viewer to the network, you can access the web

interface of the ABUS Viewer directly via the web browser. The web interface can

be reached in the web browser via the IP address, which can be found on the

monitor's start display.

• Connection via WiFi

After booting, the ABUS Viewer provides a WiFi hotspot. On the start display of

the monitor, you can see the WiFi name (SSID) as well as the password to

connect to the ABUS Viewer with your mobile device. Now you can reach its web

interface in the web browser via the IP address, which can also be found on the

monitor's start display.

If the general conditions of use have been confirmed and you have an internet

connection, you can access the menu of the ABUS Viewer via the web interface.

First, the password must be changed.

Please note, if you need to reset the password in the future, you will

need the IP address of the ABUS Viewer to access the device. It is

therefore recommended to assign a fixed IP address during

configuration.

Please note that the device restarts after changing the network settings.

Now you can add IP cameras from the network as described in the section

"Cameras" of the following chapter.