Acer AR385 F1 Spécifications - Page 6
Parcourez en ligne ou téléchargez le pdf Spécifications pour {nom_de_la_catégorie} Acer AR385 F1. Acer AR385 F1 15 pages. Dual socket 2u server
Également pour Acer AR385 F1 : Spécifications (21 pages)
Acer AR385 F1 specifications
Technical specifications
®
PCIe
specifications
The primary I/O bus for the main board is PCIe Gen2. The following table lists the characteristics of the PCI-E
bus segments. Details about each bus segment follow the table.
NOTE: The signaling bit rate of PCI Express is 2.5Gbit/s one direction per lane for Gen 1 and 5.0Gbit/s one
direction per lane for Gen 2.
Expansion slot
Number
PCIe x16
3
PCIe x4
1
PCIe x4
2
NOTE:
1. Indicates the number of physical electrical lanes running to a PCIe
2. Default bus assignment (in decimal). Inserting cards with PCI™ bridges may alter the actual bus assignment
number.
3. Slots are enumerated differently based on the operating system. Microsoft® operating systems enumerate
Device ID by bus starting from the lowest bus to the highest.
Onboard storage specifications
Item
Controller
Simultaneous drive transfer channels
Max throughput per channel
Data transfer method
Drive type supported
RAID levels support
RAID function support
RAID OS support
Additional features
Type
Bus
1
width
PCIe Gen2
x8
PCIe Gen2
x4
PCIe Gen2
x1
Description
®
AMD
SP5100 SATA controller
6 onboard SATA ports
3 Gb/s
Non-RAID mode
•
RAID mode (Adaptec RAID driver)
•
Serial ATA
RAID 0, 1, 10 (Adaptec software RAID)
•
Supports multiple logical volumes
Setup through ROM based Array Configuration Utility
Installation scripting support
NOTE: This controller does not support LED functions
• Windows Server 2008
• Windows Server 2008 R2
• Windows Server 2003
• Red Hat Enterprise Linux 5.4
• SuSE Linux Enterprise Server 11
NCQ (Native Command Queuing)
•
AHCI (Advanced Host Controller Interface)
•
Voltage
Connector
3.3V
x16
3.3V
x4
3.3V
x4
®
connector.
Location
Length
Riser, left
Full height
Riser, right
Low profile
Riser, right
Low profile,
half-length
6