Apollo 1600 Manuel d'installation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Apollo 1600. Apollo 1600 17 pages. Swing gate operator

635/636 CONTROL BOARD CONNECTIONS

8 Pin White Connector (two on 636 Master & Slave)

MASTER

7 Pin Black Connectors

1 ORANGE - Open Limit Input (Normally open unless gate is opened)

2 WHITE - Close Limit Input (Normally open unless gate is closed)

3 BLACK - Motor - Positive during open cycle, Negative during close cycle

4 RED - Motor - Negative during open cycle, Positive during close cycle

5 GREEN - Ground (Limit Switch Common)

6 Ground Not used

7 BLACK - Ground - Battery Negative

8 RED - Battery Positive (+12 VDC)

1 Edge 1 Input

2 Edge 2 Input

3 Ground

4 Ground

5 Stop Input (N/C)

6 Close Input (N/O)

7 Open Input (N/O)

8 Ground

9 Ground

10 Free Exit Input (Open only for telephone entry, probes, etc.)

11 Ground

12 Under Gate or Shadow Loop Input

13 Ground

14 Safety Loop or Photo Beam Input

3 Pin Black Connectors (3)

GND Ground

INP

Input (Activates gate when momentarily connected to ground)

12V +12 Volt Output (For powering options - 3 Amps Max.)

Used when the control board is not functioning. Unplug the

motor harness from the Master (or Slave) Connector and

momentarily insert into the Emergency Bypass Connector to

open the gate. In the event the motor is not disconnected

quickly enough, the blue 15 amp fuse will protect the circuit

board from damage and should be replaced when the

original problem is fixed.

3 Button Control

Emergency Bypass Connector