Dash Go DES001 Manuel d'instructions et de recettes - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions et de recettes pour {nom_de_la_catégorie} Dash Go DES001. Dash Go DES001 15 pages. Salad chef
Imprimer la pageASSEMBLY
Clean the Salad Chef and all of its components prior to assembly and use. Always turn
off and unplug the appliance before assembling, disassembling, moving and cleaning.
1.
Place the Motor Base on a clean and stable surface.
2.
Insert the desired Cone into the Cone Holder. While
holding the Drive Shaft use your other hand to turn the
Cone clockwise until it interlocks with the Cone Holder.
3.
Store the remaining Cones inside the Cone Compartment.
Cover with the Cone Compartment Lid. As you push the
Cone Compartment Lid into the back of the Motor Base,
hold down the Compartment Lock Button. The Lid will click
into place.
8
4.
Hold the Processing Chute so that it is at a 90 degree
angle with the Motor Base. Insert the Drive Shaft of
the Chute into the Drive Socket. Twist the Processing
Chute counterclockwise until it locks into the Motor Base.
The Feed Tube should sit fully upright.
5.
Attach the Splash Guard by lining up the Guard's brack-
ets with the bracket slots located on the rim of the Cone
Holder. Twist the Splash Guard counterclockwise to lock it
into place. The lip should point downward.
6.
Plug in the Salad Chef. Press the On/Off Button for a few
seconds to lock the Cone into place. Put a bowl or cutting
board under the Processing Chute and get ready to shred,
slice and dice!
ASSEMBLY
9