Apollo Sprayers E7000 Manuel d'instruction - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Apollo Sprayers E7000. Apollo Sprayers E7000 10 pages.
Imprimer la page1. WARNING
*DO NOT USE EQUIPMENT BEFORE READING THIS SECTION*
In order to assure safe operation of your spray system, please read the following instructions carefully.
•
Always follow solution manufacturer's safety instructions and warnings.
•
Always spray in a well-ventilated area.
•
We recommend that you use an approved face mask
•
Always store indoors, never allow unit to freeze.
•
Always use original manufacturers replacement parts
•
Never spray flammable materials
Never alter or modify any part of this equipment; doing so can cause equipment malfunction
•
and/or bodily injury.
•
Never attempt to clean any part of the turbine motor while it is plugged in.
•
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE TO WATER.
•
Never leave spray equipment unattended. Keep away from children or any person not
familiar with spray equipment.
CONGRATULATIONS! You have just purchased the finest HVLP Spray system available. You are
about to enjoy the great benefits of TrueHVLP™ spraying, flawless applications and a very short
learning curve. Our designs are the result of many years' experience in manufacturing TrueHVLP™
Turbine spray systems, and TrueHVLP™ spray guns.
Whether you are new to spraying, you have sprayed before, or are just new to HVLP spraying; there
are some basic spraying guidelines that will help you to achieve the best results and optimum
success from your new equipment. Reading this information carefully and following these simple
steps will ensure that you get the best performance and results from your new spray system.
INSTRUCTIONS
Check the contents of your box. The following are included:
1. Spray Gun
2. Parts Kit with wrench (spanner)
3. Instruction Manual
HOW YOU'RE ECO SERIES TRUEHVLP™ SPRAY SYSTEM WORKS
Your Apollo ECO Series TrueHVLP™ Spray System has three components: the turbine unit, an air
hose and the spray gun. The Turbine unit, when connected to the correct electrical power supply and
with the on/off switch in the "on" position provides a continuous source of clean, warm, dry, low-
pressure turbo air. The air hose connects the Turbine unit to the spray gun. Air flows through the
hose to the nozzle of the specially designed Apollo ECO spray gun. Atomization of the
material/coating is achieved when the high CFM of airflow mixes with the stream of fluid passing
through the specialty designed tip/nozzle. This low-pressure atomization principle achieves minimum
misting (overspray) to the spray environment and maximum solution transfer efficiency to the
substrate because of less "Bounce Back". The Turbine has one air hose outlet on the side of the unit
and is designed to run one spray gun.
2