Dass OD-0910 Manuel d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dass OD-0910. Dass OD-0910 5 pages. Towel warmer

Hardwire

installation

instruction

of the holes needed for the screws on the wall.

2. Drill holes in the wall.

4. Cut the supply cable. Make sure

to keep enough wire to go through

the tube and to plug

into the junction box.

5. Pass the supply cable through

the tube provided for this

purpose and pass the wire

through the plate.

7. The supply cable should exit

from the rear of the product.

1. Identify the location

3. Insert screw anchor

into the holes.

6. Remove the tube already

present on the towel warmer and

replace it with the tube available

in the box provided for hard-wired

installation. Rivet the base onto the

nut with the fixing screw.

8. Connect the supply cable to the

junction box and aim the plate in

the junction box.