4DRC 4D-V30 Manuel d'utilisation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} 4DRC 4D-V30. 4DRC 4D-V30 16 pages.

10.3 Horizontal calibration operation:

Long press the calibration key on the remote controller,

When the LED lights on, calibration of the aircraft is completed, the remote controller emits "beep"

(Figure 1).

Note: The calibration must be completed only when the aircraft is placed on a horizontal plane.

10.4 Start/stop

Push the left control lever on the remote control upward (Figure 2). At this time, the aircraft can take off

normally. After taking off, all the indicator lights of the aircraft will always be on. During the flight, whether

you short press the

Note: This function operation is only suitable for the aircraft in an uncontrolled state. Under normal

circumstances, it is recommended to use the one-key takeoff/one-key

10.5 One-key take-off and landing

When unlocking is complete, gently press the "One Key Takeoff/Landing" key on the remote control

(Figure 4), the aircraft will automatically rise to a height of about 1 meter to maintain a stable flight; when

you press this function key gently again, the aircraft will automatically land slowly.

Operate the aircraft with the remote control. Before taking off, please operate according to the

above sequence: Turn on (refer to 10.1)→ frequency matching of the remote control starts

Warning

(refer to 10.2)→horizontal alignment (refer to 10.3)→ start/stop (refer to 10.4)→ one-button

taking off and landing (refer to 10.5)

key, the aircraft will stop flying (Figure 3).

Figure 2

and the LED lights on the aircraft will flash.

Figure 1

Figure 3

Figure 4

landing key.