APP SPEC Pak Instructions de montage - Page 2

Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} APP SPEC Pak. APP SPEC Pak 2 pages.
Également pour APP SPEC Pak : Instructions de montage (2 pages), Instructions de montage (2 pages)

Imprimer la page

Step 5 Block Powerpole

•

Orient Powerpole

housings with hoods down (See Figure 4)

•

Block Powerpole

housings by interlocking dove tails to create individual rows (See Figure 5)

•

If more than one row is required, block rows together by interlocking dove tails

Step 6 Insert Powerpole

•

With Hood down, slide Powerpole

the left side, aligning the holder posts with the grove in Powerpole

•

Orient the remaining holder half with on the left side (See Figure 6)

•

Slide remaining half into the assembly, inserting the holder posts into the Powerpole

grove and aligning the tongues and grooves on the holder halves

Step 7 Install Crimped Signal Contacts into the Connector Housings:

•

Orient the insert holder with the to the left

•

Snap the crimped signal contacts into the appropriate holes in the back of the holder

halves (See Figure 7). A tactile snap will be felt when contact is latched.

•

Repeat until all signal contacts have been installed into the housing

Step 8 Install Crimped Power Contacts into the Connector Housings

•

Orient the insert holder with the to the left

•

Insert crimped power contacts into the appropriate Powerpole

tact lip snaps over the edge of the spring (See Figure 8)

•

Repeat until all power contacts have been installed

Step 9 Install insert holder into the plug shell

•

Secure insert holder to the plug by tightening the screws in an alternating manner.

Torque: 13 in-lb (1.4 N-M) (See Figure 9)

Step 10 Tighten Sealing Nut on Gland

•

Hand tighten until snug, tighten additional ½ - ¾ turn with a wrench (See Figure 10)

Figure 8

Figure 9

REGISTRATION

"Anderson Power Products", "APP" are registered U.S. and foreign trademark of Anderson Power Products

PATENTS AND TRADEMARKS

HEADQUARTERS: Anderson Power Products®, 13 Pratts Junction Road, Sterling, MA 01564-2305 USA T:978-422-3600 F:978-422-3700

EUROPE: Anderson Power Products® Ltd., Unit 3, Europa Court, Europa Boulevard, Westbrook, Warrington, Cheshire, WA5 7TN United Kingdom T: +44 (0) 1925 428390 F: +44 (0) 1925 520203

ASIA / PACIFIC: IDEAL Anderson Asia Paciﬁ c Ltd., Unit 922-928 Topsail Plaza, 11 On Sum Street, Shatin N.T., Hong Kong T:+(852) 2636 0836 F:+(852) 2635 9036

CHINA: IDEAL Anderson Technologies (Shenzhen) Ltd., Block A8 Tantou Western Industrial Park, Songgang Baoan District, Shenzhen, PR. China 518105 T: +(86) 755 2768 2118 F: +(86) 755 2768 2218

TAIWAN: IDEAL Anderson Asia Paciﬁ c Ltd., Taiwan Branch, 4F.-2, No.116, Dadun 20th St., Situn District, Taichung City 407, Taiwan (R.O.C.) T: +(886) 4 2310 6451 F:+(886) 4 2310 6460

SPEC Pak

housing together

block into Powerpole

block into the holder half marked with on

www.andersonpower.com

High Power Plug

™

Page 2

Figure 4

Holder

(See Figure 6)

Figure 5

housing until the con-

Figure 6

Figure 7

Figure 10

, 213 Pratts Junction Road, Sterling, MA 01564-2305 USA www.andersonpower.com

Hood Up

Correct

Incorrect

Suggest Hood

Orientation for Plug

Grove

Sockets

Hood Down

Pins

Signal Pin & Socket

1S6558 REV 00