4EVAC IMPACT Manuel de l'utilisateur - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} 4EVAC IMPACT. 4EVAC IMPACT 14 pages. Controller
Également pour 4EVAC IMPACT : Manuel de référence (8 pages)
Hacousto Holland bv
Industrieweg 87
2651BC Berkel & Rodenrijs
CONTROLLER user manual
The L-Net port delivers power to remote devices. The maximum power capacity of each L-Net port is
500mA (protected with a, slow type, automatic fuse). L-Net devices of different types have different average
power consumption, which may vary from 30mA up to 180mA. This implies limitations in terms of the
maximum number of devices powered over the L-Net.
NOTE: Consider power consumption of L-Net powered devices!
In the table below, you can see an example of power consumption over the L-Net. This example showcases
the usage of a single type of L-Net device (4E-FMTC microphone console with 180mA current consumption
@24V), where the units are distributed equally over the L-Net cable.
No. of
devices
AWG26
on single
(13.4ohms / 100m)
L-Net bus
1
250m
2
186m
3
107m
4
71m
5
53m
For more information about installation and powering of remote network devices, please see the network
device installation manual and 4EVAC Battery Calculator.
Note: Power injectors are available and can be found on our pricelist from May 2020.
Global network
G-Net is a redundant network ring where multiple Controllers may be connected into one system. It is used
to reliably synchronize data between all connected devices and for multi-channel live audio transmission
with very low latency. G-Net works as a redundant double ring between Controllers, which keeps the global
system intact in case of single link failure.
To create a redundant G-Net ring between multiple Controllers, connect both G-Net ports between every
unit in the network, so that you create a closed ring.
Power over G-Net (active by default) is dedicated to supply devices connected to the G-net port, such as
fiber transceivers (FSC).
L-Net daisy chain topology
Maximum total L-Net cable length
AWG24
(8.42ohms / 100m)
250m
250m
170m
113m
85m
Page 8 of 14
Author:
Method of Power
AWG22
(5.24ohms / 100m)
250m
From L-NET
250m
From L-NET
250m
Power injector
182m
Power injector
136m
Power injector
DD
Total current draw
@24V
180mA
360mA
540mA
720mA
900mA