Duren 521805 Manuel d'instruction - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Duren 521805. Duren 521805 9 pages. Conventional gravity gun

FMT3006_Product Instructions 19/09/2014 11:23 Page 3
PLEASE KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE
13
ALWAYS spray in a well ventilated
area.
14
ALWAYS wear an approved respirator
when using this machine.
15
DO NOT spray at animals, plants,
electrical sources, other persons or
their property under any circumstance.
16
ALWAYS keep you work area clean
and tidy. Untidy work areas are a
hazard to yourself and others.
17
ALWAYS maintain a stable, secure and comfortable posture when working with this tool.
Always avoid stretching and over reaching.
18
Avoid using a platform or hop up when using this tool.
19
ALWAYS stand on a stable, dry, non-slip surface and wear protective footwear when
using this tool.
20
Always wear or use the relevant PPE, protective footwear, appropriate gloves, ear
defenders, respirator and eye protection must always be worn. Do not wear loose
clothing, rings or jewellery and tie long hair back.
21
Unauthorised persons and children should not be allowed near the work area or to use
the tool and should not be left alone with it.
22
All visitors should be made aware of the tool and the hazards relating to it, including but
not limited to;
A: The potentially hazardous nature of the paint material and implications of contact with
skin, eyes, clothing and the breathing of vapours.
B: Trailing air hoses and trip hazards
C: Slippery surfaces and mess caused by over spray, accidental discharge and spillages.
D: The risk of accidental discharge.
E: Avoidance of freshly painted surfaces or workpieces.
23
DO NOT hold the workpiece with your hands. Always use clamps or a vice for the best
and safest results.
24
Ensure that adequate air ventilation and fume extraction is installed in the spraying area
if indoors and that it is in good working order.
25
If painting outdoors, ensure that over spray is not falling on private property such as cars,
bikes, drive ways, windows, etc. and that there is not entry of paint material into
watercourses and irrigation ditches.
26
Disconnect tool when changing accessories or filling paint cup.
27
Switch tool off when moving to a new position.
28
Make sure that you have enough slack in the air line to enable unimpeded movement.
29
BE AWARE OF YOUR SURROUNDINGS. Other persons activities may have
potentially lethal implications for you. Likewise, make sure that others around you are
aware of your presence and activities and that your own actions are not impeding or
harming those around you.
30
DO NOT use this tool if parts are missing or damaged. Doing so will invalidate the
warranty and may cause yourself or others harm.
31
Use only approved service or replacement parts. Not doing so will invalidate the
warranty and may cause yourself or others harm.
32
DO NOT use incompatible accessories or attachments. Doing so will invalidate the
warranty.
33
DO NOT attempt to use this tool for any job or purpose outside of its design parameters
and capabilites. Doing so will invalidate the warranty.
34
Repairs carried out by unauthorised repair agents will invalidate the warranty unless you
have been given specific permission by Fast Mover Tools on a case by case basis only.
35
Do not use this tools whilst under the influence of drugs, alcohol or intoxicating
T: 01582 661993 F: 01582 667100 E: [email protected]
T: 01582 661993 F: 01582 667100 E: [email protected]
Fast Mover Tools Limited
W: www.fastmovertoolsuk.com
Fast Mover Tools Limited
W: www.fastmovertoolsuk.com
See point 15