DURHAND B72-038 Manuel - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} DURHAND B72-038. DURHAND B72-038 17 pages. Seven-in-one workbench
Également pour DURHAND B72-038 : Utiliser l'instruction (17 pages)

Imprimer la page

3.Please follow the below steps to connect with a quick clamp.

1)Remove the small plastic part of your quick clamp (Fig 1).

2)Put the steel bar into the connector (Fig 2) and put a pin into the lock hole,

make sure they are firmly connected (Fig 3).

3)Put the connector into Sawhorse hole on the workbench surface and rotate at

least 30 degrees (Fig 4).

4) With the help of the two vice pegs on the workbench, the sawhorse is com-

plete.

NOTE: DO NOT step on the workbench while the legs are fully extended.

MAINTENANCE

● It is recommended that the general condition of any workbench be examined

before using. Keep your workbench in good condition by regularly checking the

product. Have necessary repairs made by qualified service personnel.

● Clean the workbench on a regular basis.

-16-