4F Maschinentechnik Limpar SP-94 Manuel d'utilisation - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} 4F Maschinentechnik Limpar SP-94. 4F Maschinentechnik Limpar SP-94 14 pages. Slat scraper
Imprimer la pageLimpar SP-94
1.2.2 Type designation
1.2.3 Identification
The product is identified by the information on the type plate. The type plate is
located on the rear panel of the machine housing.
We recommend making a note of this data
here, so that it is always to hand:
Purchase date:
Invoice no.:
The entire identification has documentary force, and may not be amended or
rendered illegible.
1.2.4 Information required for enquiries and purchase orders
When ordering attachments and spare parts, please quote the type designation
and machine number of the machine in question.
End-users must obtain spare parts and attachments through specialist dealers.
Repairs must be carried out by specialist repair shops.
The use of attachments and spare parts sourced from other manufacturers is not
intended. In the interest of safety use only original spare parts and attachments
authorised by the manufacturer. The use of parts from other manufacturers may
nullify any liability for resulting damage.
2. Safety
2.1 Basic safety instructions
This operating manual contains basic safety instructions that must be followed
when preparing for operation, during operation, and when servicing the machine.
Therefore, it is absolutely essential that the operator read this operating
manual before starting up and using the machine. It must be available to the
operator at all times.
The general safety instructions listed under this main heading, as well as the
specific safety instructions included elsewhere in the documentation, must be
heeded.
Failure to follow the safety instructions may pose a risk of bodily injury, as well as a
risk to the environment and the machine. Failure to heed the safety instructions
may result in the loss of all claims for damages.