Apperson Datalink 3000 Manuel de l'utilisateur - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Apperson Datalink 3000. Apperson Datalink 3000 16 pages. Scanner apperson datalink 3000

Imprimer la page

Inconsistent scoring or marks are not detected:

•

Very light or thin pencil marks may not be recognized by the sensors. If

the marks are made in ink (blue, black or other color) the scanner will not

detect the marks. Mark over the intended marks with a No. 2 pencil. If the

marks appear valid but are not recognized, try cleaning the read sensors

and re-calibrating the scanner (refer to page 9 — Clean My Scanner and

page 8 — Calibrate My Scanner).

Poor Print Quality:

1. Lift the print cartridge cover.

2. Locate and remove the print cartridge that is printing poorly.

3. Cover the nozzle and gently oscillate to redistribute the ink. Wipe the nozzle

side to side with a paper towel. Inspect the plate to ensure all dust has been

removed (figure 8).

4. Place the print cartridge in its slot. Make sure the print cartridge cover is

securely seated and locks into place. Refer to "Installing the Ink Cartridges"

on page 2.

If you continue to experience poor print quality, it may be necessary to replace the

ink cartridge.

Figure 8

Continued on page 12