Data Harvest EASYSENSE V-Hub Manuel de référence - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel de référence pour {nom_de_la_catégorie} Data Harvest EASYSENSE V-Hub. Data Harvest EASYSENSE V-Hub 15 pages.
Imprimer la page
EASYSENSE V-Hub Reference Manual
Connecting V-Hub Wi-Fi to a network
V-Hub Wi-Fi can operate in two different modes:
1. Connected to its own local network (Access Point)
V-Hub Wi-Fi is set to Access Point by default. In this mode the iPad or Android connects to a network
created by V-Hub. This connection is typically used when not in range or able to access the school's
network (perhaps on a field trip). While connected to V-Hub in Access Point mode, the iPad or Android
will NOT be connected to any other school network resources, and therefore unable to access other
items such as web pages, email, cloud storage, etc.
It is possible to have multiple V-Hub Wi-Fi loggers each creating their own separate network.
2. Connecting to an existing school's network (Infrastructure)
In this mode V-Hub Wi-Fi and the iPad or Android connect to the same existing network. It has the
advantage of allowing the iPad/Android to remain connected to other resources delivered by the
school network, such as web access, email, printing and cloud storage facilities, etc.
To set V-Hub's Wi-Fi to run in this mode download the EasySense Logger Setup utility from our
website, data-harvest.co.uk.
Note: V-Hub Wi-Fi loggers use 802.11n, ensure the Wi-Fi network is n mode compatible.
The name of this V-Hub logger
The name of the network (in this
case the access point (AP) network
V-Hub Access Point connection using the default settings
1. On V-Hub short press the button until the cursor points to Wi-Fi. Press the button for approximately 3
seconds until the option highlights then release
2. Connect the iPad or Android to the V-Hub's Access Point network:
Select Settings.
Select the Wi-Fi link. Ensure Wi-Fi is ON.
Choose the (V-Hub's name) AP network from the list of available networks. Wait for confirmation
that the network has been joined e.g. a tick or it shows as Connected.
3. Start the EasySense App.
4. On an iPad tap on the status button 'Not Connected' (bottom right of the screen), on an Android tap
on the connection icon (top right of the screen). Select the V-Hub's name from the list.
5. The status will change to show that it is 'Controlling V-Hub xx or Viewing V-Hub xx'.
6. When you've finished select the connection status icon in the EasySense software to disconnect, then
press the button on V-Hub to reset.
Connecting V-Hub to a school's network (Infrastructure)
Download EasySense Logger Config from our website,
will let you change V-Hub's Wi-Fi settings for connection to an existing schools network.
Change the name of the logger, set an AP network password, etc.
Download EasySense Logger Config from our website,
Data Harvest Group Ltd, 2017
Wi-Fi
Fisher 20
Fisher 20 AP
Open Network
192.168.20.1
V-Hubs IP address
www.data-harvest.co.uk
www.data-harvest.co.uk
14
DO260 (2)
Open (no password) or
Password protected
(Product No 2080). This
(Product No 2080).