Data Harvest 1180 Manuel - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Data Harvest 1180. Data Harvest 1180 19 pages. Wireless carbon dioxide sensor
Imprimer la page1180 - Wireless Carbon Dioxide Sensor
Calibration
The sensor can be calibrated in the EasySense2 App.
Leave the sensor in a fresh air environment for approximately 20 minutes to calibrate the sensor to
400ppm CO2.
Firmware Updates
Occasionally Data Harvest may release updated firmware which will contain improvements or new
features.
Updates will take place when you connect your sensor to the EasySense2 app. You will be given the
option to decline an update.
Updates can be performed over USB or Bluetooth and will typically take less than one minute. Updating
firmware over USB will be quicker than Bluetooth.
Do not disconnect the sensor, or power off during the update.
If you have a wireless connection to the EasySense2 app, the sensor will have to be reconnected after
performing the update.
9 / 19 | Revision: 0 | DS165