DURKOPP ADLER 550-867 Instructions supplémentaires - Page 10
Parcourez en ligne ou téléchargez le pdf Instructions supplémentaires pour {nom_de_la_catégorie} DURKOPP ADLER 550-867. DURKOPP ADLER 550-867 20 pages. Btsr sensor
Imprimer la page
Replacing the thread tension PCB
Abb. 8: Pulling off the plug
⑥
⑥
(6) - Plug
Inserting the PCB
1. Remove the new PCB from its antistatic bag.
2. Connect the plug (6) to the PCB.
3. Tighten the screws (6) on the plugs.
4. Screw the PCB (5) onto the stud bolts.
5. Tighten the PCB (5) to the stud bolts using the 4 screws (7).
Abb. 9: PCB packed in antistatic bag
8
Additional Instructions 550-867 - 01.0 - 08/2017