Data-Tronix DT-QAM-AMM-1 Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Data-Tronix DT-QAM-AMM-1. Data-Tronix DT-QAM-AMM-1 12 pages.

Imprimer la page

3.5

Accessing the DT-QAM-AMM-1 Admin Settings

Adjust the settings listed below using the front panel buttons as described on the previous page.

You must login as described below to edit settings.

3.5.1 Modular Settings:

3.5.2

Frequency Settings:

1. Once powered on, the DT-QAM-AMM-1 takes about 15 seconds to become operational. You

will then see the message "Initial Wait" appear on the display. After 30 seconds the message

"CH 2 & RF 00 " will show on the display.

2. Press the OK button twice and enter 0000 as the password.

3. Use the UP/DOWN button to display RF EDIT, SYSTEM, DEFAULT, REBOOT mode selection.

DT-QAM-AMM-1 Manual