DataApex Alltech 3300 ELSD Manuel - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} DataApex Alltech 3300 ELSD. DataApex Alltech 3300 ELSD 20 pages. Clarity controls

Imprimer la page

Alltech 3300 ELSD

4.3.1 Method Setup - Acquisition - Settings

Settings tab for adjusting the parameters of the detector..

Heater Lower Drift Tube

Turn on the heater of the lower part of drift tube.

Heater Upper Drift Tube

Turn on the heater of the upper part of drift tube.

Heater Optics Block

Turn on the heater of the optics block.

Gas Flow

Turn on the flow of carrier gas.

Laser

Turns on the laser.

Gain

Sets the gain of the detector.

Shutdown

Sets the behavior of the detector after the analysis is completed.

Keep State

Detector keeps the ON state.

Set Off after analysis

Set the detector OFF after an analysis is performed.

Temperature

Sets the temperature of the drift tube.

Fig 7: Method Setup - Acquisition

- 10 -

4 Using the control module