DataBay DVIE-101T Manuel de l'utilisateur - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DataBay DVIE-101T. DataBay DVIE-101T 20 pages. Cat5 dvi-d + audio extender family
Également pour DataBay DVIE-101T : Manuel de l'utilisateur (14 pages)

Imprimer la page

1. User Manual

(5) Selection of Cat5/5e/6 cable: You may use most of current Cat5/5e/6

cables, and since the quality varies, we do encounter some cables

not perform well, even it is expensive. Therefore, please test your

current cables before you installing the devices on the site. For some

environment need to prevent potential interference, the FTP type

cable is recommended. The connector must be made by 568B/568B

type. The EIA/TIA definition of 568B in the pin assignment is

(1)orange white, ()orange, ()green white, (4)blue, (5)blue white,

(6)green, (7)brown white, and (8)brown.

(6) Connect Cat5/5e/6 cable: Plug two ends of cable to Transmitter and

Receiver's RJ-45 "SYSTEM LINK" port, the Receiver's connected

monitor should display now and the green LED above DVIE-101R'

s RJ-45 port should turn ON to reflect the DVI signal activation. For

DVIE-101R, you can manually adjust the EQ/FOCUS to have the

best DVI display. The displayed DVI resolution will also relate to the

distance been extended, it will be better to test prior actual installation

and should not exceed the suggested frequency and corresponding

distance.

DVI

PAIR

PAIR 1

JACK POSITION

Projector

Cat5e/6 cable

Connection of Single-Port DVI-D Extender

PAIR 4

PDP

DVI Projector Monitor

LCD