DataBay KVME-300 Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DataBay KVME-300. DataBay KVME-300 16 pages. Transmitter, receiver

Imprimer la page

User Manual

(5) Function Test: After above installation, you will be able to operate

from the Receiver unit – complete control of keyboard / video monitor

/ mouse. During the operation of Receiver side, the STATUS LED

of Transmitter will turn on red to indicate the operation of Receiver'

s user and can only view and unable to control the connected PC or

KVM. In the other way, during the operation of Transmitter unit, the

STATUS LED of Receiver will turn on red to indicate the operation of

Receiver's user.

(6) Manual VGA Adjustment: The video quality can be manually adjusted

by the control of GAIN and FOCUS in the back of Receiver unit.

(7) Video Problem & Solving: If you find unstable image or unable to

display after the installation, please confirm following items or contact

your direct vendor for further assistance

A. Check if PC's VGA resolution and frequency over the limit

of monitor, if so, please change the VGA configuration to an

acceptable level.

B. Ensure all equipment has correct grounding and AC outlets on the

same electronic phase; also don't use -wire extension cord to

prevent potential power damage or interference.

C. Check if the Receiver's power adapter is AC7.5V with a capacity

over 1 Amp.

D. Try to connect Monitor directly to PC, and ensure the basic

function of VGA output and monitor display.

E. If using LCD monitor, there might have some image offset or

blinking, please adjust the position, clock or phase of monitor

status, or simply press "Auto Adjust/Tune" to have a better image

solution.

(8) Keyboard / Mouse Problem & Solving: If you have any keyboard or

mouse irregularity during installation or operation, please try following

items