DataCard CD820 Manuel de référence de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de référence de l'utilisateur pour {nom_de_la_catégorie} DataCard CD820. DataCard CD820 11 pages. Instant issuance system
Également pour DataCard CD820 : Manuel d'installation rapide (17 pages)
Imprimer la page
Datacard CD820 User Reference Guide
114: Cover opened during job
Cause: The printer cover was opened while printing.
1.
Check all printer doors to make sure that they are closed completely.
Press down on the cover ridges to make sure that the cover latches completely
on both sides.
2.
Make sure that all doors are locked.
3.
Press the USER button to clear the message.
Refer to "Close the Printer Doors" on page 15 for more information.
150: Print while unlocked
Cause: The printer is unlocked.
The card will be canceled.
Make sure that all access doors are closed and locked securely.
Refer to "Close the Printer Doors" on page 15 for more information.
151: Failed to lock
Cause: An attempt to lock the printer failed.
The card will be canceled.
1.
Make sure that all access doors are closed securely.
2.
Try locking the printer again.
Make sure that the reject tray is installed properly before locking the printer.
Refer to "Empty the Reject Card Tray" on page 14 and "Close the Printer Doors"
on page 15 for more information.
6
172: Insert cleaning card
Cause: The printer is ready to be cleaned.
•
If the cleaning card is in the input hopper, press the USER button.
OR
•
If the cleaning card is not in the input hopper, insert the card into the printer
and then press the USER button.
Refer to "Clean the Printer" on page 8 for more information.
173: Improper shutdown
Cause: The system was shut down improperly or lost power.
1.
Press and hold the USER button to clear the message.
2.
Always use the POWER button to power off the printer.
Refer to "Check Power Connections" on page 16 and "Check Data Connections"
on page 17 for more information
Common LCD Messages
7