DataCard CR500 Manuel d'installation rapide - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} DataCard CR500. DataCard CR500 15 pages. Instant issuance system
Également pour DataCard CR500 : Manuel d'installation rapide (18 pages)
Imprimer la page
CR500 Instant Issuance System Quick Install Guide
f.
Remove the green retransfer film
cartridge.
A
B
g. Load the retransfer film.
B
A
Film Guides
Supply Roll
Do not reinstall the retransfer film
cartridge until after the cleaning card
is run.
5. Clean the Print Unit
Do not run the cleaning card if the
heated roller is hot. Allow the printer
to cool first.
a. Close the print unit door.
b. Keep the security enclosure door
open.
4
C
2 frames
D
c. Pull out the exception card slide.
d. Insert the cleaning card.
Caution: Use the cleaning card
with the label "Printer Only," part
no. 506277-001.
i.
Remove the protective paper
from the single-sided cleaning
card (A).
E
ii. Insert the cleaning card into
the exception slide (B) with
the sticky side facing up.
iii. Push the exception slide in,
past the resistance until it
reaches the stop position (C).
iv. Push the card to the print
unit card feed roller (D). Stop
when the card is just under
the roller (E).
CR500 Instant Issuance System
506277-001
A
B
C
D