DataCard CE870 Manuel de référence de l'utilisateur - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel de référence de l'utilisateur pour {nom_de_la_catégorie} DataCard CE870. DataCard CE870 13 pages. Instant issuance system
Imprimer la page
Datacard CE870 User Reference Guide
Load the Indent Ribbon
1.
Unlock and open the embosser supplies door.
2.
Remove the indent ribbon cartridge and place it on a flat surface with the
spindles facing up.
3.
Remove the new indent roll from its package.
Caution: Do not separate the silver take-up spool away from the blue supply
spool.
IMPORTANT: Do Not Separate
4.
Match the supply spool hub with the left side spindle.
5.
Push the supply spool into the spindle until it clicks securely into place.
14
6.
Roll up one full turn of indent ribbon on the silver take-up spool.
7.
Roll out a slack length of indent ribbon from the supply spool.
8.
Route the ribbon around cartridge rollers. Follow the routing diagram on the
indent cartridge.
Caution: Do not twist the ribbon while routing.
9.
Match the keyed pattern of the take-up spool hub with the right side spindle.
10. Push the take-up spool in until it clicks into place.
11. Turn the take-up spool clockwise one full turn to eliminate slack.
12. Replace the indent ribbon cartridge.
i.
Align the cartridge with the guides inside the embosser.
ii.
Slide the cartridge in until it clicks and stops.
13. Close and lock the embosser supplies door.
Load the Indent Ribbon
15