Durr EcoGun 648 Manuel d'utilisation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Durr EcoGun 648. Durr EcoGun 648 16 pages. Automatic spraying gun

Imprimer la page

must be electro-statically conductive. For the connection

of this hose, use clamping unit M14x1.5 (not included in

the delivery). Connect the hose for the control air with the

diameter 6.0x4.0mm and the spraying air with the diameter

8.0x6.0mm.

SERVICING

Important preconditions for the high quality function of the gun

are the adjustment and the respective maintenance of the gun,

particularly cleanliness and cleaning after use.

To achieve high-quality spraying, it is necessary to ensure the

cleanliness of the jet system (particularly the semi-ring part between

the nozzle and the neck of the nozzle).

The regulation of the volume of the outflow of the liquid from

the nozzle can be resolved by the restriction of the lift of the needle

(we recommend using it only when it is not possible to reduce the

pressure of the transported liquid).

ATTENTION

When regulating the output in the nozzle there is greater wearing of parts.

Do not immerse the gun in solvent, the life of the sealing will be permanently

reduced.

MAINTENANCE AND CLEANING

rinciPles for cleAning And mAintenAnce

1. Do not leave the dried application substance on the gun.

Always clean using the respective solvent recommended by

the manufacturer of the material.

2. Do not use metal items to clean the holes in the nozzle

system.

3. When necessary, lubricate the thread of the cap nut on the air

nozzle and the needle in the groove in the rear part of the gun

with a few drops of oil.

mPortAnt PrinciPles for error

1. Clean all of the nozzle system.

2. Correctly treat the air for spraying (without dirt, water and

oil).

3. Filtered application material must have the correct viscosity -

follow the regulations of the producers of materials.

free oPerAtion

EcoGun 648