Cavecool Affection Onyx CC168DB Manuel de l'utilisateur - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cavecool Affection Onyx CC168DB. Cavecool Affection Onyx CC168DB 12 pages.
Également pour Cavecool Affection Onyx CC168DB : Manuel de l'utilisateur (16 pages)

Imprimer la page

BUILT-IN DIAGRAM

Please follow this diagram if you want to insert the wine cooler into any solid structure.

It is important that the ventilation grille at the bottom front of the wine cooler is never covered.

If a plinth is to be mounted in front of the cabinet, make sure to drill holes or install a

ventilation grille to ensure proper ventilation. Ensure a minimum of 2 cm. of free air from the

top of the wine cabinet to the underside of any item on top.

It is very important that the wine cooler can get away the heat, it produces. It is therefore

recommended to ensure additional space behind the cabinet than the approx. 2 cm from the

mounted grille on the backside of the cabinet. It is advised to allow min. 5 - 7 cm. of free

space between wine cabinet and back wall.

Keep in mind that the door must be able to open and close after installation. Make a space

of at least 1 cm. in the side for the opening door.

- 11 -