Durr Dental VistaScan Perio Plus Instructions d'installation et de configuration

Parcourez en ligne ou téléchargez le pdf Instructions d'installation et de configuration pour {nom_de_la_catégorie} Durr Dental VistaScan Perio Plus. Durr Dental VistaScan Perio Plus 2 pages.

Imprimer la page

Installation and configuration instructions

VistaScan Perio Plus

Only fully-qualified personnel may set-up, install or operate this appli-

ance.

Minimum requirements

Imaging program

DBSWIN or VistaEasy by Dürr Dental

Third-party software on request

Computer system

See "System requirements for computer systems for

imaging" (9000-618-148/01)

1 Connecting up the device

The device can be connected to the USB or network.

The connecting cables are contained in the scope of delivery.

Do not connect the device to the USB and to the network at the

same time.

• Connect the connecting cable (USB/network) to the device.

• If necessary, connect the network cable with the network.

Only connect the USB connecting cable to the computer when the

installation assistant asks you to do so.

• Switch the device on.

2 Installation

2.1 Driver installation (only for USB connection)

• Close all programs.

• Place the provided DBSWIN DVD (from Version 5.3) into the DVD drive.

The start window opens.

• If the DVD does not start automatically, execute the file "CD_Start.exe".

• Select the required language.

• Go to the "Driver" tab.

• Click "Duerr Dental Driver Installation".

• Confirm the message by clicking "OK".

The "Dürr Dental Driver Setup" installation assistant starts.

• Follow the instructions of the installation assistant.

2.2 Setting up the network (only for network connection)

• Switch on the network devices (router, PC, and switch).

• Check that TCP port 2006 and UDP port 514 are released in the firewall

being used; if not, release them.

If you are using the Windows firewall, you do not need to check the ports

since you are asked if you want to release them during the driver installa-

tion process.

3 Configuration

For both connection types (USB and network), the configuration takes place

using VistaNetConfig, which is automatically installed during the installation

of DBSWIN or VistaEasy.

• Click Start > All Programs > Dürr Dental > VistaConfig > VistaNetConfig.

• Click the "Refresh" symbol

• Activate the connected device in the "Registered" column.

You can also register multiple devices.

3.1 Configuring the device with a USB connection

You can change the device name and query the configuration in the "Vista-

Net device configuration" window.

• Click the "Edit" button

• If necessary, change the name.

• Click "Apply" to save the configuration.

3 / 4