ELRO AS80CA11A Instructions d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} ELRO AS80CA11A. ELRO AS80CA11A 4 pages.

Imprimer la page

Mounting the camera

The camera can be placed on table top, mounted on a wall or ceiling. When
mounting on a wall or ceiling, use supplied screw and wall plugs to secure the
camera in place.
Select the appropriate location for the camera:
- Place the camera at least 1m away from surrounding metalwork which can
affect its Wi-Fi transmission.
- Do not install the device near fire or heat sources to avoid damage.
- Do not install the device at humid places or exposed to rain.
Note: It is normal if the camera appears warm during operation

Troubleshooting

The troubleshooting table lists some possible causes and solutions. Please
contact your original retailer or nearest service center if the below solutions
cannot solve your problem.
Symptom
Possible Cause
The LED never turns
The power adapter is
ON
not connected well.
When adding a new
Wi-Fi password error
camera, Homesys
reports camera is not
reachable
Cannot play the live
Wi-Fi network is out of
video from the camera
range
Local internet upload
speed not enough
How to connect camera
Home router is replaced
to a different network
Reset to factory default
The camera needs to be reset to factory default before it can connect to a new
Wi-Fi network.
Recommendation
Check you connected the
camera to supplied power
adapter.
1. Reset the camera (refer to
next section) and try QR code
set up again.
2. Try connecting by WPS
method.
Change the mounting location
of camera
Each camera requires at least
512kbit upload speed.
Reset camera to factory
default (refer to next section)
4
1. Using a sharp object, press and hold the reset button behind the camera for
more than 10 seconds then release.
2. The camera will restart itself and will be ready again when it plays a musical
tone.

Specifications

Operating Temperature Range
Operating Humidity
Max. Image resolution
Encryption
View angle
IR LED range
Power supply
Wi-Fi protocol
** Specifications are subject to change and improvement without notice.
0°C - +45°C
5 - 85% RH
1920 x 1080 (1080P)
H.264
101°(H), 58°(V)
5m
DC adaptor, 5V 1A
Wi-Fi 802.11 b/g/n