Addvent AVACSPL12N Instructions d'installation et manuel d'utilisation - Page 15

Parcourez en ligne ou téléchargez le pdf Instructions d'installation et manuel d'utilisation pour {nom_de_la_catégorie} Addvent AVACSPL12N. Addvent AVACSPL12N 17 pages. Split air conditioners

Imprimer la page
AVACSPL12+18Ninstructions
Tips for operation
Cooling
How to make cooling more efficient
G
Close windows and reduce sunlight to increase the cooling effect.
G
Position the outdoor unit where it will be shielded from direct sunlight. This will reduce running costs.
Heating
A comfortable heat level lies in the difference with outside temperature.
G
The set temperature for heating will not be too different than outside temperature. Though this varies with area, set
the temperature to between 20–24°C. The heating effect decreases when the ambient temperature is below 5°C.
Dehumidifying
G
Humidity has a relation to temperature and wind. Generally speaking, the most comfortable humidity is 60%–75% in
summer and 55%–70% in winter. Temperature and speed are automatically selected by microprocessor.

Maintenance

If the Air Conditioner is not to be used for a long time
G
Start fan only for 3-4 hours to completely dry the inside of the system.
Set free -selecting mode and select the highest set temperature when fan is turning.
G
Turn off air conditioner, unplug the mains.
G
Take the batteries out of the remote control.
When you want to use the air conditioner
G
Clean air filters and replace them to original position.
G
Inlets and outlets of indoor and outdoor units should not be covered/blocked.
G
The earth wire should not be loose.
Cleaning

Before cleaning

G
Unplug from the mains power supply.

Cleaning the indoor unit

G
Clean indoor unit with soft cloth
Do not use solvents or abrasive cleaning products to clean the indoor unit as they may cause damage.
Note: Turn off the system, unplug mains and turn off breaker before cleaning, high speed turning fan during operation may
cause injury.
12/3/08
09:06
Page 15
15