Elsässer Eliga 70095 Instructions d'utilisation - Page 10

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation pour {nom_de_la_catégorie} Elsässer Eliga 70095. Elsässer Eliga 70095 13 pages. Led-coloured-light projector with cable bundle and end sleeves, led-coloured-light projector 18 w with radio-remote control, ready-made cable bundles made of glass- or plastic-fibre, glass-fibre cable with sheath heat-resistant up to 120 c for sauna, plas

Imprimer la page

6. Electrical connection

The LED-coloured-light projector is connected to the electronic network using the included wall power supply.

Risk of damage caused by water

Do not expose the wall power supply to splash or dripping water.

Attention

Two connection variants are possible:

1. Connection to an electrical socket

Plug the power supply into an easily-accessible socket to allow you to disconnect at any time.

2. Connection to the sauna control's light switch

Electrical current can cause mortal danger

Any work on the sauna's control system must be carried out by a licensed, qualified electrical

engineer.

Warning

Using an extension cable, connect the power supply tot he light switch of the sauna's control system. Pay atten-

tion to maximum power input.

7. Initial operation

Turn the LED-coloured-light projector on by plugging the wall power supply into the plug socket or using the light

switch on the sauna's control system.

Dip Switch:

The switch number 12 must be at the bottom,

otherwise the light projector can not convert

the signals from the remote control!