Elsema INTELLIGENT SLIDER iS1500LV Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Elsema INTELLIGENT SLIDER iS1500LV. Elsema INTELLIGENT SLIDER iS1500LV 8 pages. High speed sliding gate opener with battery back-up

Imprimer la page

Plan View Layout / Conduit Position

Quick Start Instructions

1. Place operator in correct position (Pinion wheel to be parallel to the gate and stepped out

to allow for width of rack once it is mounted onto the gate frame). Mark out fixings and fix

operator to the concrete pad.

2. Fix rack to the gate frame keeping 1mm-2mm clearance between the rack teeth and Pinion

wheel.

3. Once the rack is fixed move the gate and sight the rack moving over the pinion wheel,

check that most of the pinion wheel meshes with the rack. Make sure rack runs freely over

the pinion wheel, any tights spots should be corrected by adjusting the rack height. Check

the operator is firmly bolted down to the concrete pad.

4. Ensure stops are installed on the gate for the fully closed and fully open positions.

5. Connect Photo Electric Beams, Safety Bump Strip and all other safety devices as

required.