Elsema iS260 Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Elsema iS260. Elsema iS260 11 pages. Swing gate opener

C. INSTALLATION OF REAR BRACKET

: Before securing the rear bracket to the pillar check the front bracket to make sure can be

Step 1

welded to a solid point on the gate leaf.

 Fully close the gate. Fully extend the motor shaft. This will be the gate's fully closed position

 Connect the rear and front brackets to the motor

 Hold the rear bracket onto the pillar with the calculated A and B values.

 Move the motor in a vertical direction until the fixing zone is in a solid area of the gate leaf for

the front bracket.

 For inward opening, the fully extended motor shaft will be the closed limit of the gate.

 Open position of the gate is adjustable by the shaft clamp.

Step 2: Then fix the rear bracket to the pillar.

Step 3: Fix the operator on the rear bracket.

iS260/iS260D SWING GATE OPENER MANUAL